Max Wright Ltd - MPS - Withdrawable Pattern Sections

MPS™

www.maxwright.co.uk/mps/
info@maxwright.co.uk

MPS™ - Withdrawable Pattern Sections

The Withdrawable Motor Starter Sections accommodate motor starters up to a rating of 55KW (100amps) either as a Direct On Line (DOL) or Star Delta.

Outgoing plug-in terminals are silver plated as a standard but can be gold plated if required. Any combination of field and communication signals i.e. RS232, RS485 etc can be accommodated by the modular pin-out arrangment provided.

On removal of the draw unit the busbars are shrouded to IP2x giving electrical segregation and allowing safe access into the section.

The motor starter draw units specifications:

150mm H x 300mm W	Half Width Draw Unit	Up to 11KW D.O.L.
150mm H x 600mm W	Full Width Draw Unit	Up to 18.5KW D.O.L.
200mm H x 600mm W	Full Width Draw Unit	Up to 55KW D.O.L.
300mm H x 300mm W	Half Width Draw Unit	Up to 30KW Star Delta
400mm H x 300mm W	Half Width Draw Unit	Up to 55KW Star Delta

The Motor Control Centres standard 600mm wide column can accommodate 24 x 150mm high 300mm wide half width D.O.L. motor starter units,

or 12 x 150mm high 600mm wide full width D.O.L. motor starter units,

or a combination of both full and half width starter units.

Rear terminals and wiring.

Index
Introduction
Construction
Busbar System
Fixed Pattern Sections
Withdrawable Pattern Sections
Forms Of Seperation
Certification